real id nyc how to make hologram for fake id

2022-04-21 06:28

real id nyc how to make hologram for fake id

Do you have questions about ID card issuance? We have answers!

  If you are looking for an effective way to increase your card’s security, holograms are the way to go. But integrating a hologram to an ID card isn’t as simple as firing up your card design software and adding a holographic image to your card artwork.

  None of the ID card printers sold on the market today are capable of printing holograms. Why, you ask? The short answer is it isn’t technically possible yet.  Holograms are three-dimensional (3D) images and all card printers are only capable of printing two-dimensional (2D) images.

  Given the technical limitation, the ID card industry has come up with a very clever solution and that solution is holographic laminates and overlays. The holograms in these films can be:

  Custom Holograms (manufactured exclusively for you)
Standard Pre-Printed Holograms (available to everyone)

The production of holoraphic laminates is a very complex and expensive process that require special equipment and expertise. As such, custom holograms are generally expensive, costing around $10,000 per order with a production lead time that usually involve weeks.

  Fortunately, less expensive alternatives do exist. The most common method for adding holograms to ID cards is through the use of standard pre-printed holographic overlaminates. These are thin rolls of film that are applied on ID cards surfaces by lamination printers. The most popular styles are globe and wave but other designs are also available.

  Below are examples of ID cards with holographic overlays. Notice how the holograms add subtle designs to the surface of the cards.

  An ID card printer with laminating capabilities is required to use these holographic films. Note that some ID card printers have lamination capabilities built-in, while others have them as optional upgrades. If you don’t have an ID card printer with lamination features, your options are Fargo’s HoloMark cards and Magicard’s HoloKote cards.

  HoloMark cards from Fargo come with a holographic foil in the corner of the card. Just like overlaminate films, they are pre-designed with standard images, but can be customized through special order.

  Magicard’s HoloKote cards are a popular choice for most businesses that are looking to use custom holograms because they are affordable compared to custom overlaminates. However, it must be pointed out that the “holograms” on HoloKote cards are not true holograms. They are two-dimensional (2D) watermarks that are customizable using Magicard’s Rio2e and Tango2e printers in conjunction with a HoloKote key, which contains the custom artwork.

  In addition to adding holographic images to a card, these overlaminate films act a protective layer on cards keeping them from fading over time.

How Do I Add Custom Holograms to My ID Cards?

  Adding a standard or custom hologram to your ID cards not only increases the security level of your credentials; it also gives themHow to Add Holograms to ID Cards a more professional and finished look. While printing a custom hologram with a desktop ID card printer is not possible, there are a few options available that allow you to include holograms on your cards:

  Although Magicard’s HoloKote feature is not a true hologram, it does offer visual security in the form of a watermark. The HoloKote watermark becomes visible when the card is viewed at an angle. Magicard offers the option of four standard HoloMark designs that can be added to your cards by using any direct-to-card Magicard printer. As long as you have a ribbon and enable the feature in your printer’s driver, you are set without any extra costs. If you’d like to have the watermark image be your company logo, customizing this feature may be an option for you!

  If you’d like a true hologram but don’t have the option of custom lamination, consider customizing your card with an embedded hologram in the form of a 2D or 3D foil stamp. Pricing varies depending on how detailed you go with your design. No special equipment is needed to personalize cards with an embedded hologram; any of the card printers ID Wholesaler carries will work.

  If you already laminate your cards and you’d like to customize a holographic image for the highest visual security, a custom laminates may be something to consider. As with holographic cards, pricing varies depending on the level of detail, as well as the additional security features you would like. There are minimum order requirements, so if you print around 10,000 or more cards per year, this may be the perfect solution for you. Call an ID Professional for additional details at (800) 321-4405.

  You may also be able to add the lamination unit to your existing ID card printer equipment depending on your set up.

  If a custom hologram is not necessary, standard holographic cards and holographic laminates are available at a fraction of the cost. It’s important to note that although you’ll still need a lamination-capable ID card printer to use standard holographic laminate, holographic cards work with virtually any card printer.

  For more information on how to add holograms to your ID cards, call a knowledgeable ID Professional today at (800) 321-4405. We’re committed to finding the solution that works best for your organization and your requirements!

[Guide]How to make a fake ID

  Steps:

  1)Obtain necessary supplies from one of the following websites:

  http://arcadiaid.com

  http://poisonid.com

  2)Find and edit the templates

  Search a Peer-2-Peer network such as Kazaa, LimeWire or BitTorrent to find a template. By using Adobe Photoshop or Macromedia Fireworks, or a free program like GIMP, you should easily be able to edit the templates

  3)You should begin editing by changing the text fields.

  Edit the eye and hair color fields as follows:

  Eye Color- Indicate eye color abbreviation:

  BLK – Black

  GRY – Gray

  MAR – Maroon

  BLU – Blue

  GRN – Green

  PNK – Pink

  BRO – Brown

  HAZ – Hazel

  MUL – Multicolor

  Hair Color- Indicate hair color abbreviation:

  BAL – Bald

  BRO – Brown

  SDY – Sandy

  BLK – Black

  GRY – Gray

  WHI – White

  BLN – Blonde

  RED – Red

  4)Then, scan in the photo and signature image files

  You need to scan in a passport photo or other acceptable ID picture. Also scan in a signature. If the background of the passport photo does not match the background of the state id, you will need to do some editing.

  5)After scanning the passport photo into the computer, the person’s face will need to be separated from the background so it flows seamlessly with your ID card template. Using a program such as Adobe Photoshop, Macromedia Fireworks, or GIMP, provides you with an image editing tool called “Magic Wand”. This tool will allow you to click a color in the image and it will select all surrounding colors that are similar or the same. There will be a slider that will allow you to select the amount of variance from the color you select. The higher the variance relates to more of the image that will be selected. Once the background is nearly fully selected without containing any of the person’s face, press ‘Delete’ on your keyboard to erase it. You can then magnify the image and use the eraser tool to clean up around the person’s face. At this point, zoom out and copy the image. It can be pasted onto your ID card template. It will then flow seamlessly into your template design and you can choose any background color you want!

  6)Then, add a Barcode

  The unusual-looking scrambled barcode on the back of most driver’s licenses is known as a PDF417 barcode. This barcode contains most of the information contained on the front of the license. By editing this readout, you can encode your information into this barcode. You can generate these barcodes by finding a free PDF417 Generator online. Below is the general sequence.

  ANSI 6360263f02DL20393504EM02460010DLDAQ1414556

  DAASMITH,JOHN,A

  DABSMITH

  DACJOHN

  DADA

  DAG423WILSON

  DAIMIAMI

  DAJFL

  DAK044

  DBB190922

  DBA2480922

  DAU511

  DAW170

  DAZBR

  DAYBLU

  DBC2

  DBHN

  DARC

  DBD200684003

  DASB

  DBE1

  DBIN

  EMEMEWPFD

  7)Add a Magnetic Stripe

  If your license requires a magnetic stripe and you want it to be scannable, it can be encoded with an encoder. Generally these are very expensive and are difficult to find. However, you can get the EasyIDea Magnetic Stripe Encoder for less than $400 bucks. There are two types of magnetic stripes, HiCo and LoCo. HiCo and LoCo magnetic differ in that HiCo are much more difficult to demagnetize. The encoders for these typically were much more expensive than for LoCo. Most HiCo encoders encode LoCo stripes as well. The best way to program the stripe is to decode a working driver’s license, edit the data, and then program it back onto the stripe. Encode the magnetic stripe after the card is finished

  8)After editing is done, you can start printing

  You will need to print on a synthetic paper. There are two types of synthetic paper that are nearly the same. Teslin and Artisyn paper are single layer, silica-filled, polyolefin printing substrate with unique microporous and temperature resistance features that make it the product of choice for laminated ID badges. Teslin is more expensive than Artisyn and much less versatile. If you want to use a desktop inkjet printer, you will achieve better results with Artisyn or Artisyn NanoExtreme™ synthetic paper. Printing on Teslin with an inkjet does not work well and tends to look grainy and smear. The Artisyn and Artisyn NanoExtreme™ are coated with chemicals to absorb the ink effectively. It is cheaper than Teslin, works well with all types of printers including inkjet and laser printers. It also tends to produce better print quality results. Teslin can be found at PoisonID.com and Artisyn can be found at ArcadiaID.com. Arcadia also sells perforated sheets that punch out in the size of the ID cards.

  9)The next step is to select your printer. The preferred method is to use a pigmented based inkjet printer like an Epson printer with DuraBrite ink. This tends to produce incredible results and works well with Teslin even though it is not a laser printer. Better results are still achieved on Artisyn paper, and for the highest quality results Artisyn NanoExtreme™ should be used. If a pigmented ink printer is not available, a laser printer is still a good result. Laser printers produce sharp and clear results, but the ink tends to look waxy. Lastly, any dye-based inkjet printer will work fine. A dye-based inkjet printer is that standard color printer that most people have in their home. Again, if you use dye-based inks make sure to use Artisyn. You should print on highest quality photo settings.

  Print on one sheet of paper, both front and back.

  10)Then, the next step is cutting.

  If you are using EasyIDea Microperforated Artisyn, you can skip this tedious step. Otherwise, start by cutting out the ID from the paper. Tracing the dimensions of the ID using a butterfly pouch is generally helpful. A paper cutter or X-Acto knife is also helpful. After cutting sheets by hand for a while, I decided I’d rather use the punch-outs from http://arcadiaid.com

  11)Then you will need to laminate.

  You must use thermal laminating in order to bond the butterfly pouch to the synthetic paper. Once laminated, the card will harden and resemble a PVC card. You must use a thermal (heat) pouch laminator. Avery, Arcadia EasyIDea, or GBC makes good ones that run around $50.

  12)Next, place the insert into the butterfly pouch. You must place the card into a carrier. Run the carrier through the laminator. Immediately following lamination, it is helpful to place the card under something flat like a book so that it cools flat.

  13)Then, apply a hologram.

  Generally, it is acceptable to use a generic hologram. Very few people actually examine the hologram and read what it says on it. I have had my fake for over two years with a generic hologram on it and I have never had a problem. If you’re concerned about making something that looks truly authentic, there are other methods to replicate holograms.

  14)Making a Hologram

  The gold holograms on many ID cards are called binary holograms. These holograms can be easily reproduced using Pearl-Ex paint and Photo-EZ paper.

  This product is for making stencils. A stencil is basically the outline of a picture with the negative part missing. To make the stencil you scan the hologram off your id, then convert it to an all black image. Next you print the image on a transparency. A transparency is a transparent sheet of plastic meant for inkjet printers or lasers. Then you take the transparency and tape it to the Photo-EZ. You put it out in the sun and all the areas of the material not covered by the black negative of the holo cures. When washed the part covered by the negative washes away, leaving you with your stencil. You will want to order the high resolution material. This product can be ordered from cBridgeand more information can be found there.

  As for the painting material, the two main ones are Interference Gold (Fine) made by Golden Acrylics and PERL-EX DUOTONE. The latter of the materials work best because of the fact it reflects two colors of the spectrum. Perl-Ex comes as a powder and preparation is needed. These paints are transparent when viewed from straight on. When viewed from different angles you see different colors depending on the particular colors of the paint. Perl-Ex comes in Duo Red-Blue, Duo Blue-Green, and Duo Green-Yellow. Perl-Ex is available in a lot of places here is one: http://sierra-enterprises.com/pearlex.htm

  You have to buy a Transparent Base made for paints to prepare the Perl-Ex. A good one is Speedball Transparent Base. You mix in a 1:50 ratio. 1 part Per- 50 parts base. If you are using Golden acrylics then you use a 5:1 ratio. 5 parts paint 1 part base. When applying the paint in the stencil, you should use if possible one of those brushes made for screen printing. It is like a pencil but with a flexible tip. A sponge can be used but extra care needs to be taken when applying. You want to apply a very thin amount and practice will be needed to get it right.

  On a lot of the new ID’s there is a multicolored hologram that reflects the full spectrum (like a rainbow). This is especially true of most of the Canadian ids. What you do is pick the two most dominant colors and buy the matching Perl Ex colors. This will be good enough to reproduce the holo. The holo can be put directly on the finished ID or before lamination on the inside of the pouch. If you choice is the inside then remember to put it in the reverse.

  15)Then, you’re ready for the finishing touches.

  It is recommended that you sand the edges of the hologram with a very fine grit sandpaper. This removes the jagged edges of the synthetic paper. You should lightly sand the front and back of the id to give it a more worn look.

  16)Lastly, these instructions were to make a 30 mil drivers license that resembles a PVC card. If you want to make something thinner that bends corner to corner like some ID cards, you can remove the front part of the butterfly pouch and simply laminate the back of the pouch with the synthetic paper. Many machines use this method, but it can be accomplished manually. You can also replicate signature strips by scratching the surface of the butterfly pouch with sandpaper.

  17)17.Have fun and don’t be an idiot with your ID.xD

real id nyc how to make hologram for fake id